Phono Box II

Today, many amplifi ers do not have a specifi c phono cartridge input. Phono Box II is ideal for use with these amplifi ers and allows the use of MM and MC cartridges. The output of Phonobox II can easily be connected with a line-input (AUX,...)  

Phono Box II

(PDF) 64.1 KB

Phono Box SEII

Phono Box SE II is an even better phono preamp, both on technical and acoustic grounds. It is equipped with a higher grade power supply and offers a wide range of adaptation possibilities. It also has switchable subsonic fi lter. This unit offers a highly musical performance for MM and MC cartridges.  

Phono Box SEII

(PDF) 66.7 KB

Phono Box II USB

Same features as Phonobox II, but offering the additional possibility to transfer analogue audio onto PC/Mac using USB1.1 protocol.

• Amplification and RIAA equalisation for MM and MC cartridges  

• Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs  

• Automatic recognition, without additional driver, by standard PC  

• Runs on Windows® and Mac OS® operating systems  

• Phono MM/MC selection switch located at the rear of the unit  

• Small size allows installation close to record player  

• Available in black and silver 

Phono Box II USB

(PDF) 71.5 KB

Tube Box II

Tube Box II for MM and MC is a very high quality phono cartridge preamplifier. This unit produces a lively and powerful performance with convincing sound staging and emotional presentation.  

Tube Box II

(PDF) 68.2 KB

Tube Box SEII

Tube Box SE II offers the same characteristics as Tube Box II, but takes the sound to another level. Additional adaptation possibilities and a switchable subsonic fi lter make it ideal for use with high quality MM and MC cartridges.  

Tube Box SEII

(PDF) 94.4 KB

Speed Box II

A very useful accessory for most Pro-Ject turntables (excluding turntables listed below), that do not have built-in electronic speed change. The Speed Box II performs this change by the push of a button between 33 and 45 rpm. The quartz regulation and fi lter circuit gives a stable speed reference.  

Speed Box II

(PDF) 73.2 KB

Speed Box SEII

The Quartz-controlled oscillator of the Speed Box SE II generates clean AC-power without mains distortion. Power outputs are galvanic decoupled from the input current. Many turntables in the market (including all the Pro-ject models) use AC synchronous motors and the Speed Box SE II can be used for ultimate speed consistency and electronic speed change between 33 and 45rpm. Additionally, speed can be altered in graduated steps on either setting.

Speed Box SEII

(PDF) 72.7 KB

Align It

Cartridge alignment tool  

• Tool for cartridge alignment and adjustment  

• Special slip-proof tool for defining the turning centre of Pro-Ject tonearms  

• Adaptable to accommodate differing tonearm lengths  

• Suitable for other manufacturers' tonearms  

• Suitable for tonearms between 8" (203mm) and 12"(305mm) effective length 

Align It

(PDF) 77.6 KB

Wall Mount It

Wall mount equipment rack  

• Screwed steel construction. Matt black finish  

• Lacquered MDF board. Matt black  

• Three height-adjustable spikes to level the board  

• Surface area (W x D): 520 x 450mm  

• Overall dimensions (W x H x D): 635 x 290 x 455mm 

Wall Mount It

(PDF) 51.7 KB

Ground It Deluxe

Perfect granular filled bases with adjustable conical feet for resonance-free turntable placement. Two different sizes offer suitability for and smaller turntables. Piano finish, that perfectly matches the charcoal finish of Pro-Ject turntables.  

Ground It Deluxe 1

(PDF) 82.4 KB

Cover It

Universal dust cover  

Outside dimensions Cover it 1 (W x H x D): 525 x 290 x 425mm  

Inside dimensions Cover it 1 (W x H x D): 515 x 285 x 415mm  

Weight Cover it 1: 4,3kg  

Outside dimensions Cover it 2 (W x H x D): 460 x 255 x 365mm  

Inside dimensions Cover it 2 (W x H x D): 450 x 250 x 355mm  

Weight Cover it 2: 2,9kg 

Cover It

(PDF) 82.4 KB

Record Puck

Heavy weight record clamp.